日本語AIでPubMedを検索
食品サンプル中のカドミウムを高感度かつ高精度に分析する方法です。モリブデンをコーティングしたT型スロット付き石英管炎原子吸光光度計
A sensitive and accurate analytical method for the determination of cadmium in food samples: Molybdenum coated T-shape slotted quartz tube flame atomic absorption spectrophotometry.
PMID: 32163838 DOI: 10.1016/j.foodchem.2020.126572.
抄録
本研究では、オンライン前濃縮によるカドミウムの定量を目的として、モリブデンコーティングを施したT型スロット付き石英管アトムトラップ火炎原子吸光光度法(Mo Coated-T-SQT-AT-FAAS)を開発した。T-SQTの内面にモリブデンをコーティングし、トラップ効率を向上させた。有機溶媒の代わりに水素ガスを使用し、トラップされた原子を放出させた。その結果、検出限界は0.057μg/L、定量限界は0.082μg/Lであった。開発した方法は、0.10から1.0μg/Lの範囲で直線的に働くことができ、低い%RSD値(<3.7)を示した。その結果、従来のFAASと比較して検出力が約1202倍に向上した。開発した方法の実試料(シナノキ、粉ミルク、ミント)への適用性を確認するために回収実験を行い、0.30, 0.50, 1.0µg/Lの試料で94.4~100.7%の有意な結果が得られた。また、本法をトマト葉1573a SRMにも適用し、精度を確認した。
In this study, a molybdenum coated T-shaped slotted quartz tube atom trap flame atomic absorption spectrophotometry method (Mo coated-T-SQT-AT-FAAS) was developed for the determination of cadmium with on-line preconcentration. Inner surface of T-SQT was coated with molybdenum to enhance the trapping efficiency. Hydrogen gas was used instead of organic solvents to release trapped atoms. Limit of detection and quantification were found to be 0.057 and 0.082 µg/L, respectively. The developed method has a linear working range between 0.10 and 1.0 µg/L with a low %RSD value (<3.7). About 1202 times enhancement in detection power was recorded over the conventional FAAS system. Recovery experiments were used to determine the applicability of the method developed to real samples (linden, milk powder and mint) and significant results (94.4-100.7%) were obtained for the samples spiked at 0.30, 0.50 and 1.0 µg/L. The method was also applied to Tomato Leaves 1573a SRM to check the accuracy.
Copyright © 2020 Elsevier Ltd. All rights reserved.