あなたは歯科・医療関係者ですか?

WHITE CROSSは、歯科・医療現場で働く方を対象に、良質な歯科医療情報の提供を目的とした会員制サイトです。

日本語AIでPubMedを検索

日本語AIでPubMedを検索

PubMedの提供する医学論文データベースを日本語で検索できます。AI(Deep Learning)を活用した機械翻訳エンジンにより、精度高く日本語へ翻訳された論文をご参照いただけます。
Dent Mater.41(10):1213-1221.

ユニバーサル接着剤の塗布および硬化様式は,自己接着性レジン合着セメントの象牙質に対するせん断接着強さおよびせん断疲労接着強さに影響を及ぼす.

Universal adhesive application and curing mode affect shear bond strength and shear fatigue bond strength of self-adhesive resin luting cements to dentin.

PMID: 40634134

抄録

目的:

自己接着性レジン合着セメント(RLC)の象牙質に対するせん断接着強さ(SBS)およびせん断疲労接着強さ(SFS)を、異なる硬化様式でユニバーサル接着剤を塗布した場合と塗布しない場合で測定すること。

OBJECTIVES: To determine the shear bond strength (SBS) and shear fatigue bond strength (SFS) of self-adhesive resin luting cements (RLCs) to dentin with or without universal adhesive application in different curing modes.

方法:

2種類の自己接着性RLC(BeautiLink SAおよびRelyXユニバーサルレジンセメント)を、ユニバーサル接着剤の塗布の有無にかかわらず使用した。比較分析には従来のRLCシステム(Panavia V5)を用いた。各試験グループには36個の試験片を使用した:SBS試験には12本、SFS試験には24本を用いた。ステンレス鋼棒は、RLCペーストを光硬化させた場合とさせない場合でヒト象牙質に接着させた。SBS試験では、接着した試験片に破壊するまで荷重をかけた。SFS試験では,試験片に繰り返し亜臨界荷重を負荷した.異なる硬化モードにおけるRLCの曲げ強度も測定した。SBS試験にはTukeyの正直有意差検定による分散分析を、SFS試験にはBonferroni補正による修正t検定を用いた(α = 0.05)。

METHODS: Two self-adhesive RLCs (BeautiLink SA and RelyX Universal Resin Cement) were used with or without universal adhesive application. A conventional RLC system (Panavia V5) was used for comparative analysis. Thirty-six specimens were used for each test group: 12 for the SBS and 24 for the SFS tests. Stainless steel rods were bonded to human dentin with and without the light curing of RLC paste. For the SBS test, the bonded specimens were loaded to failure. For the SFS test, repeated subcritical load was applied to the specimens. The flexural strength of the RLCs in different curing modes were also determined. Analysis of variance followed by Tukey's honestly significant difference test, was used for SBS, and a modified t-test with Bonferroni correction was used for SFS (α = 0.05).

結果:

SFSの結果は、SBSの結果と同様の傾向を示した。自己接着性RLC単独では、デュアルキュアモードよりもセルフキュアモードの方が有意に低いSFS値を示した。デュアルキュアモードはセルフキュアモードよりも高い曲げ強さを示した。

RESULTS: The SFS results showed a similar trend to the SBS results. The self-adhesive RLCs alone showed significantly lower SFS values in the self-cure mode than in the dual-cure mode. The dual-cure mode triggered higher flexural strength than the self-cure mode.

結論:

自己接着性RLCを組み合わせたユニバーサル接着剤は、自己接着性RLC単独よりも有意に高い接着効果を示した。

CONCLUSION: The universal adhesive combined self-adhesive RLCs showed significantly higher bond effectiveness than self-adhesive RLCs alone.

意義:

自己接着性RLCと万能接着剤を併用することで、インターロッキングと化学的接着が促進される可能性がある。しかし、最適な接着効果を得るためには、RLCペーストへの光照射が不可欠である。

SIGNIFICANCE: The self-adhesive RLCs combined with universal adhesive may enhance interlocking and chemical bonding. However, light irradiation of the RLC paste remains essential to ensure optimal bonding effectiveness.