日本語AIでPubMedを検索
熱プレス二ケイ酸リチウムセラミックスの色調に及ぼす支台築造材料の影響
Influence of abutment materials on the resultant color of heat-pressed lithium disilicate ceramics.
PMID: 16706292
抄録
本研究の目的は、厚みの異なるIPSエンプレス2セラミックコーピングの色調に及ぼす支台築造材料の影響を評価することである。セラミックコーピング試験片(12.0x12.0x0.8-2.0 mm)は、IPS Empress 2材料(Ingot-100、n=5/グループ)から作製した。支台歯は、ビルドアップコンポジット、金合金、銀パラジウム合金から作製した。色は、CIE L*a*b*システムに従って測色器を用いて評価した。それぞれの支台歯試験片上の異なる厚さのセラミックコーピング試験片のL*a*b*値を測定した。その後、様々な支台歯試験片上のセラミックコーピング試験片間の色差(deltaE*ab)値を算出した。あるセラミックコーピングの厚さにおいて、deltaE*ab値に有意差が認められた(P<0.05)。したがって、IPSエンプレス2コーピング材の色は、コーピングの厚みと支台築造物の色の両方に大きく影響されると結論づけられた。
The purpose of this study was to evaluate the influence of abutment materials on the color of IPS Empress 2 ceramic coping with different thicknesses. Ceramic coping specimens (12.0x12.0x0.8-2.0 mm) were fabricated from IPS Empress 2 material (Ingot-100, n=5/group). Abutment specimens were fabricated from a build-up composite, a gold alloy, or a silver-palladium alloy. Color was evaluated using a colorimeter according to the CIE L*a*b* system. The L*a*b* values of the ceramic coping specimens of different thicknesses on each abutment specimen were measured. Following which, the color difference (deltaE*ab) values between the ceramic coping specimens on various abutment specimens were calculated. Significant differences in deltaE*ab value were observed among different abutment specimens at certain ceramic coping thicknesses (P<0.05). Thus, it was concluded that the color of IPS Empress 2 coping material was influenced significantly by both the thickness of the coping and the color of the abutment material.