日本語AIでPubMedを検索
多層ジルコニアの曲げ強さに及ぼす着色液の違いによる影響
Effect of different coloring liquids on the flexural strength of multilayered zirconia.
PMID: 31497268
抄録
目的:
本研究の目的は、2種類の着色液(水系着色液および酸系着色液)と多層ジルコニアの位置が多層ジルコニアの曲げ強さに及ぼす影響を評価することである。
PURPOSE: The purpose of this study was to evaluate the effect of two coloring liquids (aqueous and acid-based coloring liquids) and the position of multilayered zirconia on the flexural strength of multilayered zirconia.
材料と方法:
多層ジルコニア試料を上下に分割した.試験片は3つのサブグループ(n=10)に分けられた:非遮光、酸性の着色液、および水性の着色液。試験片はフライス盤で切断し、酸性着色液または水性着色液に5秒間2回浸漬した。試験片は、メーカーの紹介に従って焼結炉で焼結した。万能試験機を用いて試験片の曲げ強さを測定し、電界放出型走査電子顕微鏡を用いて試験片の表面を観察した。
MATERIALS AND METHODS: The multilayered zirconia specimens were divided into upper and lower positions. The specimens were divided into three subgroups (n=10): non-shaded, acid-based coloring liquid, and aqueous coloring liquid. The specimens were cut using a milling machine and were immersed in either a acid-based coloring liquid or aqueous coloring liquid 2 times for 5 seconds. The specimens were sintered in a sintering furnace according to the manufacturer's introduction. The flexural strength of the specimen was measured using a universal testing machine and the surface of the specimen was observed using a field emission scanning electron microscope.
結果:
多層ジルコニアの曲げ強さは400~500MPaであった。多層ジルコニアの曲げ強さは,使用した着色液の種類に影響されなかった(>.05).着色液で着色した多層ジルコニアの曲げ強さは、その位置の影響を受けなかった(>.05)。
RESULTS: The flexural strength of multilayered zirconia was 400 - 500 MPa. There was no statistically significant difference among all groups (>.05).The flexural strength of the multilayered zirconia was not influenced by the kind of coloring liquid used (>.05). The flexural strength of the multilayered zirconia colored with the coloring liquids was not influenced by its position (>.05).
結論:
着色液の塗布の違いは,すべての位置の多層ジルコニアの曲げ強さに影響しなかった.
CONCLUSION: The different coloring liquid application did not affect the flexural strength of multilayered zirconia of all positions.